Water filters valves

Water Filter Diverter Valve series - see feature details below

Diverter Valves

Tube connections:

Barbs allow fit with vinyl tube sizes of 1/4" OD or 3/8" OD.

Three types of valve operation:

If you want to know about Water filters valves,Please Click


Pull-out
Pull-out valve stem operation is the most common style and has a spring return feature closing the valve when water flow stops. Also available without the spring feature .

Quarter-turn
Quarter-turn operation style allows user to rotate the valve, selecting filtered or unfiltered water. Offers best durability. Having the most open flow path makes this design the most suitable for areas of low water pressure .

Side-to-side
Side-to-side operation style allows user to move valve stem from side-to-side, selecting filtered or unfiltered water. Offers greater durability.
Miscellaneous filter adapters allowing connection of a countertop water filter to the home plumbing.

A12CP PACK
A12CP PACK Adapts a diverter valve to common faucets with internal threads. One each of 15/16"-27 & 13/16"-27 adapter, plus washers.

EDA External Faucet Adapter
EDA External Faucet Adapter Adapts a diverter valve to common unthreaded faucet spouts. Grips onto outside of the faucet spout.

Self-piercing function
Self-piercing function with needle valve allow connection of undercounter filters into home plumbing systems

From water filter

Inline Water Filters Replacement Cartridges

ighly Effective Filter made from the finest material available to remove a wide range of water contaminants.

If you want to know about Inline Water Filters Replacement Cartridges,Please Click Inline Water Filters Replacement Cartridges

Inline sediment filter

Inline sediment filter

1. His 5micron sediment filter is made by Anti-Bacteria. High capacity filter removes dusts particles and rusts.

2. Maximum Flow : 0.75GPM

3. Maximum Pressure:125PSI

4. Maximum Temperature:100F

5. Spec: 2.5" diameter x 10" length

5. Service Life: 1500GAL / 6 months

Post Inline carbon filter

Post Inline carbon filter

1. This granular activated carbon filter is composed of high-performance activated carbon that remove free chlorine, odor, organic contaminants, pesticides and chemicals that contributed to taste and odor.

2. Maximum Flow : 0.75GPM

3. Maximum Pressure:125PSI

Inline Mineral Filter

Inline Mineral Filter

This filter improves the qualities of clean water by adding necessary for proper human development and health minerals, such as Calcium, Magnesium, Sodium, Potassium and others readily found in many natural mineral waters.

Inline resin Deionization (DI) filters

Inline resin Deionization (DI) filters

De-mineralize filter takes the full size RO to a higher level of filtration

UV Sterilizer 1 GPM

Inline resin Deionization (DI) filters

It's known that UV light of wavelengths between 250 and 270 nanometers (UV-C or UVC band) is extremely effective in killing many species of bacteria, mold spores, viruses and other microorganisms.
Form:http://www.cnwaterfilter.com/inline_water_filter_replacement_cartridge.htm

Hybrid renewable energy system

FATRONIK technological centre from the Basque Country has designed and installed a micro-wind generator at the Aubixa Euskal Girotze boarding centre (San Pedro neighbourhood, Elgoibar). Since the end of October the 2.5 kW micro-wind generator has been producing energy which is initially planned to power the boarding centre¡¯s four refrigerators, the control room, the data-reception sensors and the PCs. Moreover, four 120 kW photovoltaic plates have been incorporated into the micro-wind generator, thus generating a hybrid system which takes maximum advantage of renewable resources such as the sun and the wind.

The triple-bladed wind generator rotor was designed by the Australian company Bolwell Corporation. Each vane is 2.1m long with an aerodynamic profile chosen for working with low Reynolds values - they have a variable angle of torsion running from the base to the tip. In this way, the angle of attack of the wind with respect to the vane is kept constant all along its length. The rotor is directly coupled to a multipolar electric generator consisting of permanent magnets (PMG) with no intermediate multiplier. The current generated is alternating and with variable voltage and frequency. This current goes to a number of batteries after passing through a voltage regulator which converts the alternating current to direct and eliminates the surplus voltage. Finally, the current is converted into one at 220V with a current inverter, thus adapting the voltage for customary usage.

The wind generator starts to rotate at wind speeds of 3.5m/s and reaches maximum power at 9.5m/s. If the wind exceeds a velocity of 16m/s the passive power control system (side furling) of the wind generator comes automatically into operation: this control system is achieved through an articulated assembly between passive power regulation system and the body of the wind generator which is situated eccentrically to the axis of the wind generator¡¯s truss tower. Thanks to this braking mechanism for the rotor, both the electric surge infrastructure and the mechanical components are protected against excessive centrifugal forces.

This hybrid system is designed to work autonomously, i.e. outside the electric grid system. So, this kind of application is of great use in communities distant from cities or towns such as rural areas or zones under development. These systems can be used as a substitute for the grid in areas where the latter system is prohibitively expensive and, moreover, they promote awareness regarding natural resources. wind generator,casting,plate bending machine,hisuppliers

If they are compared to high-powered wind generators, the main difference is in the simple: easy installation and maintenance, minimum aesthetic impact and totally integrable into the environment. wind generator,casting,plate bending machine,hisuppliers，water filters,bearings,auto bearings,die casting

water filters housing

10" & 20" Standard full size water Filter Housings:

Whole house of point of entry (POE) systems are typically installed on a home's main water line, trapping sediment before it enters the house water supply. Investing in a whole-house filter will help protect clothes, fixtures and toilets against unsightly stains caused by iron and rust particles. It will protect and extend the life of your appliances by removing sand, silt, scale and other particles.

Water filter housing

Features:

1. Ideal for a wide range of applications, including residential, commercial and industrial

2. lengths and will accomodate a wide range of 2-1/2" to 2-7/8"

3. Available with clear Styrene-Acrylonitrile and opaque polypropylene sumps

4. Thick walls for increased strength

5. Leak-proof sealing with top-seated Buna-N O-ring

6. Excellent chemical resistance

7. Included: Pressure Relief Button

8. NOT Included: Filter & Mounting Bracket.

10" & 20" Slim Line water Filter Housings:

Water filter housing

Features:

1. Slim design reduces space required for installation without sacrificing capacity

2. An excellent choice for low-flow applications & when space and chemical compatibility are primary concerns

3. Applications: under-sink & countertop residential filtratiion, pre- and post-reverse osmosis filtration, recreational vehicle filtration, food service and humidifying systems

4. Available in either reinforced polypropylene or clear Styrene-Acrylonitrile in 10" or 20" lengths

10"BB & 20"BB Filter Housings:

Water filter housing

Big Blue water filter housings are ideal substitutes for costly low pressure stainless steel vessels. Big Blue water filter housings offer the versatility to meet all of your large-capacity filtration needs, including high-flow and heavy-sediment applications. The extra large housing allows for greater cartridge capacity, reducing the number of vessels required for high-flow rate applications. Big Blue Housings are compatible with a broad range of chemicals. Reinforced polypropylene housings have excellent chemical resistance and are ideal for many residential, commercial and industrial applications.
If you want to know about water filters housing,Please Click Water filter housing

Reverse Osmosis Accessories

Water goes through a reverse osmosis membrane very slowly and people don't have the patience to wait a long time to get a cup of water. For this reason the residential RO units need a water storage tank to store the purified water.

Reverse Osmosis Tank

Booster Pump

For Increasing Water Pressure To Pre-Water Treatment applications (RO Boost) Use with membranes up to 50 GPD

Booster Pump

Permeate pump

A non-electrical, energy-saving device which dramatically improves RO system efficiency.

Permeate pump

AUTOMATIC FOUR WAY SHUT OFF VALVE

The original diaphragm design of WQA validated valves provide automatic shut-off to supply line when storage tank reaches 65% of inlet pressure, to potentially save thousands of gallons of water per year. Valves are made using FDA grade.

AUTOMATIC FOUR WAY SHUT OFF VALVE

Flow Controls & Restrictors

Flow Controls (aka Flow Restrictors) are required for all Reverse Osmosis systems and must be properly sized to the membrane capacity, typically 3-4 parts brine (drain water) to 1 part permeate (product water).

Flow Controls & Restrictors

Saddle Valve

Self-piercing function with needle valve . allow connection of undercounter filters into home plumbing systems.

Saddle Valve

TDS Meter

These handheld water quality testers enable you to determine just how good or bad your water really is! These testers accurately measure the TDS level in your water. Ideal for testing reverse osmosis membrane performance and determining the need..

TDS Meter

Filter Wrenches

Filter Wrench is for use with the water filter housings

Filter Wrenches

TUBING

Available in PP and polyethylene, standard and metric, varying colors and lengths.casting,wind generators,bending machines,hisuppliers

water softener

A water softener is an appliance designed to remove minerals from water by means of an ion-exchange process. As water flows through a bed of sodium-impregnated resin beads, mineral ions are drawn from the water to the beads. The sodium ions are added to the water. Water SoftenerThe water softener unit recharges the beads with brine or a potassium chloride solution. Some water softeners have separate tanks for the sodium resin and the brine while others have the resin tank inside the brine tank.

Full-home water softeners typically are installed right where the main water line enters the house. For economy, some systems bypass faucets and fixtures that don't need soft water, such as toilets and exterior water systems. Depending on what system you have and who owns it (you or a leasing company), your water softening system may be maintained by a service company. All you need to do to get soft water is turn on the tap-and pay the bill.

Clean the injector:

1. Turn the water softener control to the bypass mode (so the main water line does not run through the softener). On some units, you also may need to disconnect the unit from the electrical source.

2. Unscrew the softener injector cap and remove the screen and injector nozzle. You may need the owner's manual to determine where these components are located on your model.

3. Remove and clean the screen with warm soapy water, then rinse in clear water. If it is damaged, replace the screen.

4. Clean the nozzle with canned air, a small wire, or a paper clip

5. Reassemble and test the unit.

Flush the brine line:

1. Turn the water softener control to the bypass mode. On some units, you also may need to disconnect the unit from the electrical source.

2. Loosen the brine line fittings at the injector housing and salt tank with a wrench, then remove the brine line.

3. To clear a clog, use a large syringe or a turkey baster to inject warm water into the line.